How to Remove Gorilla Tape Residue: 5 Homely to Pro Tips

how to remove gorilla tape residue

Is there anything that you can’t repair with Gorilla tape? The answer is more robust than itself. It can stick almost everything together. But once the work is done, the adhesive leaves an unwanted stain.

It is not only odd-looking but also very stubborn. Most of us struggle to remove its residue. It leaves us with a question. How to remove Gorilla Tape residue?

Wiping this smudge out can be tricky. But it’s not impossible. There are a lot of tricks you can find on the internet. Here we offer you five ways to remove the glue. Also, don’t miss the additional tips.

How To Remove Gorilla Tape Residue

Don’t think it’s hard. Rather your journey will be easier while following these steps properly.

#Routine 1: Use The Tape As A Blotter

The Gorilla glue officials suggest that we can use the tape as gorilla tape residue removal.

You Just Need To complete this technique, all you need is a gorilla tape.

Follow The Process:

They said that you could reuse the tape as blotting paper. Just simply rub the tape on the residue and try to remove the adhesive substances.

Blotting Paper Recommendation
  1. ZOROM’S Natural Bamboo Charcoal Blotting Paper(Check On Amazon)
  2. Teenitor Blotting Paper (Check On Amazon)

#Routine 2: Use A Penetrating Oil Like WD-40

WD-40 works as a miracle in the matter of removing gorilla tape residues. It is known as a prominent method for removing adhesives.

You Just Need to Collect a can of WD-40 oil and a clean cloth.

Follow The Process:

All you need to do is spray it on the affected area. Leave it for 5 minutes. Then rub it with a clean cloth. Voila, the stain is gone forever.

It is one of the most resistant materials to work. You can use it on metal, rubber, wood, and plastic coating surfaces. There is hardly any chance that it may harm the paint.

But you must avoid using these types of petroleum-based commodities as they might be harmful to surfaces made of polycarbonate and transparent polystyrene plastics.

WD-40 Multipurpose Spray

  • Removes grease, grime, gunk, gum, tar, sap, super glue, sticker residue, and other sticky stuff from multiple surfaces
  • Frees sticky mechanisms
  • Loosens rust-to-metal bonds

Available On Amazon

#Routine 3: Use A Mild Solvent Like A Mineral Spirit

At first, try to use some mild solvents such as mineral spirits. These are also known as mineral turpentines. For acrylic-based surfaces using mineral spirits is the best idea.

You Just Need:

Make sure you have a mineral spirit and a fluffy rug.

Follow The Process:

Soak the area that you want to remove the residue from with turpentines. After some time, rub the space softly with a delicate rug. That will do enough.

Mineral Spirit Recommendation

#Routine 4: Try Using A More Durable Solvent Like Acetone

If the ever processes don’t work, you must try stronger solvents. Acetone is known as a potent compound.

People mainly use Acetone as thinner for polyester resin. We also use it to dissolve super glue. That means it can also remove residues coming from gorilla tape.

You Just Need to Have an acetone-based solvent and a soft piece of cloth by your side.

Follow The Process:

Just follow the process described in routine three by using acetone-based thinner. And remove the residue from the affected area.

You must be amazed to know that Acetone never affects the gel coating of the surface. Some people claim that nine out of ten Acetone will work with no difficulty.

#Routine 5: Use Generic Adhesive Remover

You can also use a generic adhesive remover to terminate the residue. We use these fluids as cigarette lighters.

All You Need:

Collect an adhesive remover ( Such as Goo-gone original) and a white cloth.

Follow The Process:

Goo-gone is a popular name in this field. You can find these at any DIY hardware shop. It helps you remove any gluey, sticky, or gummy material from most of the surfaces.

Cautions

  • Do not use an acetone-based solvent in the house that is not well ventilated. It may cause undesirable mishaps.
  • For sensitive surfaces, always apply the chemical onto a soft fluffy rug. And then use that thing to clean the mess.
  • Never use a hairdryer to heat out the adhesives.
  • Never use a razor blade to scrape out the residue. It will damage the texture of the covering.
  • Don’t use coconut oil or vegetable oil as they start to solidify in low temperatures.

How To Remove Gorilla Tape Residue On A Hard Surface Like Plastic, Wall, Glass, Or Tile

Simply apply the residue remover onto the afflicted locale and swab the residue from it.

After that, rinse thoroughly with heated soapy water.

How To Remove Gorilla Tape Residue From Clothing, Fabrics, And Carpets

Apply the chemical onto the cloth. Therefore, blot the stain out with soft strokes. After that, clean the fabric with soap and water.

This thing can work on adhesives, oil pastels, gums, pastes, and many more.

But beware before using it on surfaces like silk clothing, leather products, drywall, faux SS, unsealed rock, and unfinished wood surfaces.

Bonus

You can also use rubbing alcohol, car wax, and citrus cleaners as residue removal agents.

Don’t forget to pay heed to these Cautions & Tips.

Before you start doing the actual work, you need to know about certain things. Try to remember the following tips that will help you along the process.

Additional Tips

  • Always take the necessary precautions before starting the process. Use gloves to protect your hands.
  • Remember to keep the chemicals away from your eyes, nose, and mouth.
  • Always test on a tiny and neglected area before starting the process.
  • Apply the residue remover temperature to remove gorilla tape glue.
  • Before using any reactive chemicals, always read the producer’s instructions for protection and application.

Final Verdict

Gorilla tape is one of the most popular heavy-duty duct tapes around the country. From a leaking roof to a damaged car trunk, it fixes almost everything.

But it comes with a double-layered adhesive that can leave an everlasting stain. For this, most of us hesitate to use this heavy-duty.

From now on, don’t fear the stain. Use the routines of “How to remove Gorilla Tape residue” that we discussed earlier. And enjoy using the gorilla tape without any hesitation.

Bill Burd

Being adventurous, it happens now and then to be on the water either for kayaking, hiking, or angling. And it’s been a regular routine for the last decade resulting in the best outdoorexperience with various essentials. So, assisting others with these sweet contexts forsuperioroutdoor adventures.

Recent Posts